Open source
Put your idea into your firmware, build your own ONU/modem for optical fiber
Based on openwrt
Ideal for small flash
Customise your hardware
Put better wifi chip, more RAM, ...
Herman BRULE
The leader of this project
Can teach to the novice user
User space.
The software/command used to set the gpon/epon settings, in C to have low memory footprint
Linux kernel driver. Where the performance matter.
It's the control the specific port where is connected the optical module, in C
PCB. Better and better hardware.
How the PCB part, connect the wifi chip, the ethernet, the xPON port, and what do you need. In KiCad.
Dev platform + test cases. Accelerate closed to open source.
And as BONUS help greatly to detect backdoor/security problem. Most of ONU ported to open source into few weeks. So many industrial secret... Accelerated reverse engineering. 200k of code lines. What I prefer: be paid to open source or be paid to keep closed sources...
Ported devices
Each device below runs an open-source OpenWrt image built for it, and was validated on a live GPON line against a real operator OLT. The certificate is the dated record of that validation.
| Device | Cases passed | Benchmarks passed | Certificate |
|---|---|---|---|
| X400AXF HSGQ · RTL9607F | 92 359 recorded point(s) | 37 | not issued |
A device appears here only once a run has produced its artifact; the counts are read from that artifact, never typed. A CASE is one named test; it records several POINTS -- each direction, frame size and before/after state is its own recorded measurement, which is why the second figure is the larger one.